Archive for the ‘Spinning And Weaving’ Category

The following paragraphs summarize the work of Spinning And Weaving experts who are completely familiar with all the aspects of Spinning And Weaving. Heed their advice to avoid any Spinning And Weaving surprises.

Weaving is a very old art form, but is now being practiced by both men and women all over the world. Before, the technique was only done by hand, but newer tools and methods made it readily available to make very intricate and beautiful designs with smoother lines and better quality. Weaving and spinning shops are also available in many places, including online. You can learn the methods and become a master if you devote enough time and effort.

Weaving Description

Weaving is known as a textile art wherein 2 unique sets of threads or yarns, referred to as the warp and the filling or older woof, are interlaced together to make cloth or fabric. The warp threads will go lengthways of the cloth piece, while the weft will run across from one side to the next. Cloth is woven on a loom. The loom is a material that holds the warp threads together while the threads are woven through it. Weft means “that which is woven”, which is a old English term.

The Approach

The manner wherein the filling threads and the warp interlace together is called the weave. The 3 simple weaves are called satin weave, plain weave and twill. The most of all the woven products are made with one of the weaves. Woven cloth can be plain, appearing in just one pattern or color, or woven in artistic and very intricate styles, like tapestries. The ikat is the fabric wherein the weft and warp is tie-dyed just before weaving.

Ancient Art

You may not consider everything you just read to be crucial information about Spinning And Weaving. But don’t be surprised if you find yourself recalling and using this very information in the next few days.

Handweaving is a very old art, together with hand spinning. Today, there are still some individuals who practice the traditional methods. The most of commercial fabrics that come from the United States, Canada or the United Kingdom are woven on Jacquard looms managed by computers. In the past, simpler fabrics were woven using dobby looms, while the adaptation of the Jacquard harness is reserved for more sophisticated patterns. A number of people believe in the efficiency of the Jacquard loom. They say that the weaving process used by the Jacquard loom is more economical for mills, so that all the fabrics can be woven quickly and in the best condition possible, regardless of the sophistication of the structure.

About the Process

Weaving involves interlacing a couple of thread sets at right angles to one another. The two sets are called the weft and the warp. The warp are held very firmly and in a parallel pattern, via a loom. The loom is also dressed or warped using the warp threads going through heddles on a couple or more harnesses. The weft thread is wound onto spools also known as bobbins.

The Unique Structures

The bobbins are put inside a shuttle that will support the weft thread through the shed. Different weave structures can be created by the raising and lowering of warp threads. Some of the weaves you can expect include plain weave, twill weave, complex computer-generated interlacing and satin weave.

The weft and warp can be seen in the final results. If you space the warp closely, you can fully cover the weft binding it, providing a warp-looking textile like the rep weave.

Take time to consider the points presented above. What you learn may help you overcome your hesitation to take action.

About the Author
By Anders Eriksson, proud owner of this top ranked web hosting reseller site: GVO

Have you ever wondered if what you know about Spinning And Weaving is accurate? Consider the following paragraphs and compare what you know to the latest info on Spinning And Weaving.

What is a spinning jenny?

The spinning jenny is actually a spinning wheel that has more than one spool. It was created by James Hargreaves back in 1764 in the area of Stanhill, specifically Blackburn in Lancashire, which can be located in the Northwestern part of England. This device dramatically decreased the amount of time and work that a particular person actually needed in order to come up with a yarn product. Without the spinning jenny, one worker needs to work with more than eight spools at once.

Its origin

The idea started off with a metal frame that has eight spindles made of wood at one of its ends. Eight of its rovings were actually attached to the beam of the frame. When these rovings are extended, they are able to pass through some horizontal bars that are made of wood which are all clasped to one another.

There came a time when the production of cotton could not keep up with its demand. This was when James Hargreaves started to spend more time than usual in considering different ways about discovering how the process can be improved.

Its success and downfall

When James Hargreaves invented the machine, he kept it as a secret at first. However, he was able to create a lot for his own growing industry. There came a time when the selling price of the yarn largely decreased because of the spinning jenny. This situation angered the spinning community in the area of Blackburn.

You may not consider everything you just read to be crucial information about Spinning And Weaving. But don’t be surprised if you find yourself recalling and using this very information in the next few days.

After some time, villagers just broke into his residence and destroyed all of the machines. This situation pushed him to transferring to Nottingham back in 1768. It was in his new home that he manufactured even more jennies in his own shop, still keeping everything as a secret. He even made his very own name.

Spinning jenny copycats

After some time James Hargreaves decided to apply for a patent on his invention, the spinning jenny, in July of 1770. Sadly, around this time, a lot of spinners located in Lancashire were already spinning using prototypes of his machine. He decided to take some legal action against these copycats.

These manufacturers felt threatened and were actually afraid to have a suit against them and decided to pay him three thousand pounds. Even though he initially demanded seven thousand pounds, they settled at four thousand pounds. Unfortunately, the case soon fell apart when it was found out that James Hargreaves has sold a few before.

Its discovery

A very common story about how this device was particularly invented is that James Hargreaves’ daughter, named Jenny, was knocked over to her feet by one of her father’s very own inventions. When this occurred, James Hargreaves noticed that the machine was still working efficiently, only with the spindle now pointing in an upright direction. This was when he realized that there was actually no particular reason that the spindle needed to be placed in a horizontal direction.

However, many did not believe this story and even regarded it as a myth because of the Registers of the Church Kirk were able to come up with the roster of his daughters, and none of them were named Jenny.

There’s no doubt that the topic of Spinning And Weaving can be fascinating. If you still have unanswered questions about Spinning And Weaving, you may find what you’re looking for in the next article.

About the Author
By Anders Eriksson, feel free to visit his top ranked GVO affiliate site: GVO

Do you ever feel like you know just enough about Spinning And Weaving to be dangerous? Let’s see if we can fill in some of the gaps with the latest info from Spinning And Weaving experts.

Spinning and weaving were found to have originated since the stone age. The earliest looms and threads were made from raw materials only by hand. However, the techniques we have today are still reminiscent of the very old methods. The development of the techniques has been influenced by different nations and cultures all over the globe. Here is some more information on how weaving and spinning came to be at present.

The Past Few Millennia

Early men developed the first string 20,000 to 30,000 years ago by twisting and twining handfuls of fibers that come from plants together. They prepared thin bundles of plant material and stretched these out as they twisted the material together to create fine thread or string. Weaving, sewing and spinning today began with the ability to create thread and string. Men during the stone age continued making strings and threads for various reasons. These strings had various sizes and were laced and knotted together to create several functional items, like home covering and clothes.

A lot of weavers today still use the technique of finger weaving, wherein threads are knotted and laced together using only the hands. During the Neolithic Age, the first weaving looms were created and developed. Basic weaving looms are artificial items that hold the vertical threads or warp together tightly to let the weaver insert weft threads. Two of the earliest forms of looms include the warp weighted loom and the horizontal ground loom.

If you find yourself confused by what you’ve read to this point, don’t despair. Everything should be crystal clear by the time you finish.

The Available Looms

The warp weighted loom is created using big wooden poles that are held together forming a rectangular shape. The poles can be mounted over a wall or dug into the ground to create a freestanding loom. The vertical threads or warp are held together at the top pole. Near the bottom of the frame, you will find the threads held together in clumps and secured to stone weights or clay weights. Using his hands, the weaver positions the weft threads via the warp while standing right in front of the loom. The warp weighted loom is now used by many weavers.

The horizontal ground loom features a very basic organization of poles and sticks driven right into the ground. The weaver measures the width and length required to weave the cloth and drives the sticks right into the ground. The warp or vertical threads are wound onto the sticks and tied together in place. The weaver works the horizontal threads using his hands and throughout the stretched warp. The ground loom is still used at present in the Near East by Bedouin weavers.

Chinese Influence

In China, the Shang Period witnessed the development of the treadle and frame loom system. Weaving frames that have rectangular shapes held the heddles together. The heddle is described as a long string that resembles a needle or a metal item that has an eye or opening right in the middle. The doup or loop at the bottom and top of every heddle can be seen too. The top and bottom doups are threaded at the bottom and top cross bars. The warp yarns are threaded through the heddle eye.

About the Author
By Anders Eriksson, feel free to visit his top ranked GVO affiliate site: GVO

When you think about Spinning And Weaving, what do you think of first? Which aspects of Spinning And Weaving are important, which are essential, and which ones can you take or leave? You be the judge.

Spinning wheels were developed to help individuals make designs and other kinds of materials faster. There are now spinning wheels that come in a variety of materials and styles to help make your work more efficient. You will find that there are newer technologies that provide very fast yarn production like air jets, friction spinning and an open-end system.

About the Kinds

There are many kinds of spinning wheels, plus the great wheel which is also referred to as wool wheel or the walking wheel which quickly long draws the spinning of woollen-spun yarns. The flax wheel as actually double-drive utilized with a distaff to spin linen. The upright and Saxony wheels are also available. There are multi-purpose treadle wheels that can spin yarn of worst-spun types.

The Charkha

The charkha originated from Asia. All yarns were originally made by lining up fibers through drawing techniques and then twisting the fiber together, until the spinning wheel that works via a rotor was made. Rotor spinning allowed the fibers located in the roving to be separated. There is an open end and then twisting and wrapping of the yarn as it is drawn out from the rotor cup.

Using the Hands

Once you begin to move beyond basic background information, you begin to realize that there’s more to Spinning And Weaving than you may have first thought.

A spinner that turns a crank for flywheel via the hands function to power the hand-powered wheel types. The mechanical engine type uses and presses pedals. The floor charkha or tabletop charkha is one of the most common and oldest kinds of wheels. The charkha functions very much like the great wheel, with a drive wheel turned using the hand. The yarn is then spun off the tip of the spindle. The floor charkha and the great wheel is very much the same. The spinning, however, should cease to successfully wind the yarn right onto the spindle.

The Indian independence movement used the charkha as a symbol and tool. This is a portable hand-cranked wheel that spins cotton, as well as other short-staple fibers. It can also be used to spin other fibers. The size will change. The charkha was also used a lot by Mahatma Gandhi when he was teaching.

The Great Wheel

The great wheel was considered as one of the earliest kinds of spinning wheel. The fiber is held by the left hand, while the wheel is slowly turned using the right hand. The wheel is ideal for long-draw spinning approaches, wherein the single active hand is the most used. The free hand can then turn the wheel. This wheel is used to spin wool. It can only be utilized with fiber types that are fit for long-draw spinning.

More on the Great Wheel

The great wheel measures more than 5 feet tall. The huge drive wheel turns the minor spindle assembly, while the spindle revolves several times for every turn of the drive wheel. The left hand constantly controls the wool tension so that you always get even results. When enough yarn has been created, the wheel can be spun backwards just a little distance to unwind the spindle spiral. It is then turned clockwise afterwards.

About the Author
By Anders Eriksson, proud owner of this top ranked web hosting reseller site: GVO

The following article includes pertinent information that may cause you to reconsider what you thought you understood. The most important thing is to study with an open mind and be willing to revise your understanding if necessary.

What are fabric weaves?

Fabric weaves are different methods wherein the various types of fabric are manufactured. There are actually a lot of different fabric weaves that are initially made due to various purposes. Also they can help in determining exactly how durable a particular clothing is. Figuring out which type of weave works best for a specific type of clothing can prevent having an end product that easily becomes frayed.

History of weaving

Weaving of clothes started back in the Stone Age. Although those weaves in the early years of the world did not look or feel as sophisticated as the ones that are weaved today, the principles are the same and were only developed through the next years. In fact most of the fabric weaves of today are actually inventions form the eleventh century.

Functions

Fabric weaves are regarded as the structural pattern of different fabrics. Without the fabric weave, fabric may never be constructed. How loose, decorative, tight, nubby or soft a certain fabric is depends largely on the fabric weave. They can also cause a huge variance regarding the fabric’s durability or strength.

Types of weaves

There are many kinds of fabric weaves. The most common ones are twill, rib, plain, Oxford, basket, satin, Uncut Pile, Chenille Weave, dobby, Cut Pile, Double Knit, leno, and jacquard.

Think about what you’ve read so far. Does it reinforce what you already know about Spinning And Weaving? Or was there something completely new? What about the remaining paragraphs?

How to identify the weave

For most of the fabric weave types, identifying the kind of fabric weave used is quite difficult. It is easier to study the patterns that can be found in the fibers or the yarn when it comes to completely identifying exactly which kind of weave is used. The most obvious differences are those that can be identified between twill and satin. However, when the fabrics talked about are plain and twill, the differences are not entirely observable. Since consumers are oftentimes left with such problems, manufacturers always mark their products with both the type of weave and the type of fabric that was used.

Buying the right one

The best way to find the right fabric is to base the decision on the type of weave and also on the type of fabric that were used. This is due to the fact that some weaves that are usually used for upholstery are not appropriate for a construction or design of a dress.

Plain weaves

The plain weaves are the ones that are most common and the simplest ones too. People oftentimes opt to purchase the plain weave because they are inexpensive. It is a joy to be able to produce an end product that is durable and flat with a tight surface which makes it easier to print on. Examples of plain weaves are organdy, cotton calicos, crepe, gingham, cheesecloth, taffeta, muslin, voile, and percale.

Satin weaves

Many say that satin weaves are much more complicated to handle. But still, they are more flexible than the plain type. It is referred to as satin if the filament fibers used are related to nylon or silk, but it is called sateen if the yarns used are shortly stapled like those of cotton.

About the Author
By Anders Eriksson, proud owner of this top ranked web hosting reseller site: GVO

Who are the Salish people?

The Salish people are recognized by a lot of people as experts in weaving, especially in the Northwestern side of the Pacific. This race always knows how to come up with very beautiful blankets made of twill. At present, many have already adopted new styles and kinds of dyes, weaving techniques, and fabrics that allow researchers to study a very wide variety of Salish weavings.

Use of blankets

Back then, people used blankets because of ceremonial purposes. Whenever Salish blankets are worn by a certain person, that person is identified as someone who is very civic and religious within the community. In other times, honored people are adorned with blankets in order to distinguish them. They will be sitting or standing on their blankets, and sometimes even raise the blankets to accord for their honored status.

The use of blankets is also practiced to represent how wealthy a particular individual is. In fact, blankets are given away to the other members of the community in order to show prosperity. It is actually because of the high value of blankets that they are even sometimes used as currency for purchasing or bartering others kinds of goods.

Who are assigned to make blankets?

Since the earlier modern times, the women are the ones who are in charge of producing the blankets. In fact, even though they were still young girls, they were already trained by their grandmothers. Training started when the girls are ten years old, with a far more intense one once they reach puberty stages.

It’s really a good idea to probe a little deeper into the subject of Spinning And Weaving. What you learn may give you the confidence you need to venture into new areas.

Commitment to the project

Although many believe that weaving is such an easy task, it actually needs a lot of commitment and could take such a long time before an end product is made. Those who are quite active with weaving are those who are oftentimes associated with some rituals or tasks for spirituality just like abstinence.

The name ?Salish?

This name is given to those Native Americans who have a culture and speech that are very common that there is a noticeable relationship. The Salish people are usually found residing in the Northern part of the Fraser canyon, Vancouver Island, British Columbia, or in Aberdeen, Washington.

Weaved blankets were distributed among those who attended the potlatch ceremonies as an indication of wealth. Whoever donated the blankets gained prestige, and thus, earns an increase in the social status. Whenever the supply needs to be increased, the blankets are only cut in lots of pieces so that more attendants can be accommodated with a gift. These gifts would be incorporated together in order to make a new blanket that is a lot larger.

Weaving techniques

The Salish learned many of the ancient weaving techniques and modified them to come up with better products. They would include twining of different kinds such as overlay, wrapped, three stand twining, diagonal openwork, slanting and vertical openwork, simple twining, openwork, plain openwork, and double twining. The most used weaving techniques are the twine, plain, and twill techniques.

Don’t limit yourself by refusing to learn the details about Spinning And Weaving. The more you know, the easier it will be to focus on what’s important.

About the Author
By Anders Eriksson, feel free to visit his top ranked GVO affiliate site: GVO

Are you looking for some inside information on Spinning And Weaving? Here’s an up-to-date report from Spinning And Weaving experts who should know.

The drop spindle is one of the most basic tools for spinning and weaving. To successfully make thread, you need to use the drop spindle correctly. There are different mechanisms for using the device, depending on what you are trying to achieve. You can spin using various types of spindles too. Some individuals may choose to make their own drop spindle.

How to Use

A beginner can successfully learn how to handspin by using the spindle correctly. These are very inexpensive and are quite easy to make. As soon as you have mastered the spindle, you can expect to have already learned the steps to successfully spin using the spinning wheel. You can draft out the fibers, twist the fiber to form a yam and wind up and store the spun yarn.

The First Steps

The first step is to tie the leader on. Link the leader to the drop spindle by tying a piece of yarn measuring around 18 inches long to the shaft just over the whorl. Take the yarn to the side of the whorl, then loop it around the shaft located below. Loop back over the whorl’s side and secure the end to the hook. Start spinning by leaving the fibers at the end of the leader loose. The spindle should hang under your hand hanging by the leader.

More Fiber

Truthfully, the only difference between you and Spinning And Weaving experts is time. If you’ll invest a little more time in reading, you’ll be that much nearer to expert status when it comes to Spinning And Weaving.

The spindle should be held by the right hand, while the left hand holds the leader. Spin the drop spindle away from the shaft in a clockwise motion. This is the same direction you will be using to successfully spin the yarn. You should start practicing to rotate the spindle correctly. Continue the process of spinning in the same direction until the time the leader starts to take in the twist. Leave some fiber at the end to join on more fiber.

On Winding

You have to maintain tension on the freshly spun yarn to let the twist run into the freshly drafted fiber. As soon as you let go of the tension, the twist should not travel up. Repeat the process a couple of times and observe if there is adequate twist before you proceed. If the yarn separates or becomes very slack, you should spin the spindle again to store additional twist. Once the yarn is long to allow the spindle to touch the ground, the yarn should unhook then wrapped around the spindle base right next to the whorl. You would have spun a single by now. Provide enough yarn to slip the hook back on using two inches to loosen the end fibers.

Joining the Fibers

You can overlap the wool some inches just over the fibers to catch and twist into the leader. Let the twist run into the joined fibers. You can add more twist by turning the spindle before you make new lengths of yarn. You can provide another twist to the spindle. Twist the spindle another time and provide your right hand back to where the left is holding the yarn.

Move the left hand back 3 inches, the pull and draft more wool fibers to let the spindle turn around. Let go of the yarn using the right hand and the twist should move up into the fibers. More fibers should be pulled out from the mass of the fiber by tugging the left hand. The twist should run into the fibers being drafted.

It never hurts to be well-informed with the latest on Spinning And Weaving. Compare what you’ve learned here to future articles so that you can stay alert to changes in the area of Spinning And Weaving.

About the Author
By Anders Eriksson, feel free to visit his top ranked GVO affiliate site: GVO

In spinning, there are generally no rules, but you need to follow guidelines if you want to make a very beautiful and even work. You should also understand and know the different features of a good drop spindle. There are several drop spindles available in stores and the internet, so you have to find the right model that fits your needs and personal preference.

The Ideal Drop Spindle

The drop spindle weight will rely on the kind of yarn you need to spin, like heavy spindle or heavy yarn. A drop spindle weighing more than 4 ounces, or similar to a medium-sized apple may be too heavy for regular use. The 1/2 ounce drop spindle weighs about the same as a walnut. Experts agree that the right weight is between 1.5 to 2.5 ounces. Balance is very important. The location of the whorl on the shaft will affect the balance of the drop spindle, just like the whorl shape.

Check the bottom-whorl spindle by resting the tip over the right surface and twirling it. Allow the fingers to flick the shaft so that it will spin, then create a circle using your fingers to let the spindle rotate freely, but still keeping its position upright. Check the top-whorl spindle by connecting a short length of yarn to the top of the hook, then give a quick roll to the shaft using your fingers and let the drop spindle begin rotating. Spin the drop spindle a number of times. Observe the drop spindle if it rotates freely, appears sluggish, wobbles frequently, easy to twirl or grasp or spin unusual.

About Puff

Is everything making sense so far? If not, I’m sure that with just a little more reading, all the facts will fall into place.

Pick the material that you can spin like raw material, fiber and wool. Puff refers to the quality of the first fiber that is ideal for spinning. There are several ways and reasons why you should prepare your own fiber. Using prepared fiber, you can spin immediately. Choose medium-grade wool in batt or roving/top form. The fiber should ideally hang well when you hold it slowly. It should also include some air inside, like puff. Choose the best color, dyed or natural, then separate a piece of the fiber by pulling it free. The best segment measures around 4 to 6 inches and .5 inch wide.

Making Yarn

Fiber converts into yarn by twisting motion. Fully untwisted fiber will pull apart quickly. Twisted fiber or yarn is very strong and does not easily pull apart. The twist stems from the spindle and the conversion happens between the hands. Drafting is done to let the fibers slide past one another and then allowing the twist to catch. The size of the yarn is dependent on the amount of fiber caught by the twist. When you begin to spin, the goal is to focus on the fiber between your hands. This is the fiber that will eventually turn to yarn.

The Best Source

When looking for the right raw materials, you should compare sources first. If you intend to order things online, make sure you check the background of the dealer then determine the method of payment and delivery.

That’s how things stand right now. Keep in mind that any subject can change over time, so be sure you keep up with the latest news.

About the Author
By Anders Eriksson, proud owner of this top ranked web hosting reseller site: GVO

When most people think of Spinning And Weaving, what comes to mind is usually basic information that’s not particularly interesting or beneficial. But there’s a lot more to Spinning And Weaving than just the basics.

What is spinning?

Spinning is actually a process that is known for the transformation of cotton fiber into a thread or yarn. The fibers of the cotton will undergo a lot of stages to prepare them for the spinning process. Before the cotton undergoes the spinning process for yarn, the raw fibers are separated from their seeds, something termed as ginning.

Today, ginning is done with the use of particular machinery. But back then, women had to make use of their small hands or feet to gin the fibers. After the ginning process, the fibers are cleaned in preparation for spinning.

About the cotton

The cotton is cleaned by removing the bits of dirt, while the carding pulls the fibers to form a parallel line in preparation for the spinning process. They are then rolled over a very thin layer of carded cotton with a specific stick in order to come up with very tight cylinders that measure approximately fifteen centimeters long. Once these are accomplished, the cotton is now ready for the spinning process which will transform it into thread.

When cotton is spun, the shorter fibers are drawn out from the huge mass of cotton and then twists them all together into a very long and continuous thread.

Origin of spinning wheels

Sometimes the most important aspects of a subject are not immediately obvious. Keep reading to get the complete picture.

Most of the spinning wheels used in India are the ones the Natives called charka. Today, a portable and smaller version of the charka is widely used today. They were invented by Mahatma Gandhi as his donation to the khadi movement in order to enhance the self-sufficiency in India. The threads which were utilized were very fine and were used to come up of the muslin that could be spun using a hand spindle which was called the takli.

Managing the spinning wheel

The spinning machines actually have a spike made of metal which is given the term spindle. It is through this spindle that the threads are wind together. The spindle can be turned and attached to a pulley that is attached to a bigger wheel, if not a few wheels. A single complete turn of the wheel is capable of turning the spindle a lot of times, just like what occurs to the gears that are attached to a bicycle.

Each of these cycles only takes a few seconds. They are able to pull the fibers from the cylinder, getting to twist the threads and then winding them to a finished product. When the threads are finished, they can be now dyed and treated with different chemicals so that shrinkage or unnecessary creasing is prevented, if not totally avoided, before they are woven into a particularly patterned fabric.

Forming filaments

The earliest tools which Natives used for forming filamentous substances into a thread that is continuous, is most probably the spindle and the distaff. Although this certain method is still largely utilized by a group of Natives, it is regarded by many as part of the ancient barbaric period.

The invention of the spinning wheel was actually the first improvement to this very simple contrivance. With the spinning wheel, construction of fabrics had huge improvements which did not largely base in the skills of today’s artisans but instead are accomplished through mechanical means which guarantee more accuracy.

It is through the wide use of spinning wheels that products were created in a much more rapid pace and a quick increase in the number of today’s cotton manufacturers.

About the Author
By Anders Eriksson, proud owner of this top ranked web hosting reseller site: GVO

Why are bamboos used?

It is actually because of the resiliency and light weight of this tall grass that it is widely used as a material for making furnishings, armors, and musical instruments. In fact, bamboos are also utilized in the production and manufacture of daily and industrial wares.

Vases

The clan of the Kagas hired a huge number of craftsmen and gave them relatively high wages for beautifully manufacturing ladles and flower vases for flower arrangements and tea ceremonies.

After the war, the processes and manufacture of woven bamboos were stopped and replaced with the manufacture of cheap ones that were only made of plastic. But still, the public always wanted something that was natural and made with great quality. This was probably why they always came back to the use and high demand of woven bamboo products. In only a short span of time, woven bamboo items regained its popularity.

Weaving techniques

There were already many techniques for weaving back then. They were merely developed and enhanced by the old-fashioned and modern craftsmen so that they could come up with products that had beautiful finishes and made from very elaborate techniques.

From China

So far, we’ve uncovered some interesting facts about Spinning And Weaving. You may decide that the following information is even more interesting.

The country of China is known for its abundance in bamboo resources. In fact, this particular country is known for its long history of utilizing bamboos and planting them. Moreover, their ancestors actually started out trying to figure everything they could with bamboo for more than seven thousand years ago.

Some particular places in China were actually quite popular for the production of some distinctive woven bamboo products, such as Hubei provinces, Shengxian, Dongyang, Jiang’an of Sichuan province, Hunan, and Anji of the Zhejian province.

Based on the records found in the Republic of China which date back to the Qing Dynasty, the Chinese place that was richest in bamboos and its products was Rui’an County. Since there were lots of bamboos, the number of craftsmen in this particular area also greatly increased. Moreover, bamboo craftsmen in the Fujian province and Quanzhou were even referred to as technicians.

Inheriting the craft

The craft and skill of weaving bamboos are now passed on from the master to the apprentice during the process of weaving or fixing the damages on the products. This way, the skill can be inherited from a particular generation to another generation.

According to some apprentices, it took them three years before they finally and completely learned the craft of weaving bamboo. But of course, those who are brilliant will not need that long time and still be independent in their own field of producing woven bamboo products.

The process

The bamboo craftsman cuts the bamboo into very thin strips that are made of various sizes. Only one section of a bamboo should be cut and then it should be split in lots of vertical halves. The joints of the bamboos should be smoothened and then the halves should be cleaved into further strips.

After this is accomplished, the green scarfskin and the yellow surface found inside should be removed and then cleaved into thinner strips.

About the Author
By Anders Eriksson, feel free to visit his top ranked GVO affiliate site: GVO